Posts: 107 Join date: 2008-03-29 Location: Atlanta, GA USA
Subject: Re: No communication Tue Nov 24, 2009 9:24 pm
The 16 pin plug in that 95 unit will more than likely only support OBDII generic. The other controllers will each have a seperate colored plug for diagnostics. Red, Blue, Green, and yellow. The ABS controller will use the blue and the SRS will use the green connector. The red connector will support Air ride or CUS Engine Mgt.
Launch does not support these controllers. You can get the engine codes and limited data from generic OBDII.
Posts: 107 Join date: 2008-03-29 Location: Atlanta, GA USA
Subject: Re: No communication Tue Nov 24, 2009 9:32 pm
As far as the 2000 I am not aware of any issues getting into the ABS and SRS. You should be using the -16C and remember to cycle the key off then on before selecting either of these controllers from 1999 through 2001.
Subject: Re: No communication Wed Nov 25, 2009 8:29 am
Coyote wrote:
As far as the 2000 I am not aware of any issues getting into the ABS and SRS. You should be using the -16C and remember to cycle the key off then on before selecting either of these controllers from 1999 through 2001.
Coyote
Wow I've never heard of that before, so each time you try to enter a module, you must cycle the key off/on? I know a lot of people have problems with these vehicles.
Subject: No communication 
Tue Nov 24, 2009 10:58 am
